CAPTURE WAVE FROM OSCILLOSCOPE.
load the program.
2) connect your rigol dso to PC, set to appropriate
timescale and trigger level.
3) press capture button, the program and dso
will start capturing wave. capture button will be flashing.
4) when the dso
is triggered, program will beep, download and save the wave data in PC (in
5) the capture button will stop flashing and wave will be
displayed. you can further edit or save the wave in another location.
selection region is used to edit your wave (crop, cut, clear, mirror and invert)
or later to be used as region to be saved during capture process.
change selection region, just click/hold and drag left right the green left or
right marker on the wave display.
3) selected region is indicated as blue
trigger position is indicated as orange marker and vertical line.
change it, click hold and drag to anywhere in wave display.
position is used in capture mode to position the trigger timeline in your dso
SOME NOTE WAVE
DISPLAY, TRIGGER POSITION AND SEQUEL FILE
wave display represent the
whole memory block of your dso for capture purpose, not just what you see on
your dso screen. positioning the trigger marker, will position the trigger
relative to that memory block. sequel file is/are where the captured data will
be saved, the sequel filename can be changed in Util menu. wave display also
represents the whole wave loaded from a csv file.
PROCEED TO UTILITY MODE
Main Web Page
Download Latest Version
any comment, improvement
and suggestion, please contact me at email@example.com
well, too sad if you don't have a back button